D3DTEXTUREFILTERTYPE Enumerated Type

Defines texture filtering modes for a texture stage.

Syntax

typedef enum _D3DTEXTUREFILTERTYPE {
    D3DTEXF_NONE = 0,
    D3DTEXF_POINT = 1,
    D3DTEXF_LINEAR = 2,
    D3DTEXF_ANISOTROPIC = 3,
    D3DTEXF_PYRAMIDALQUAD = 6,
    D3DTEXF_GAUSSIANQUAD = 7,
    D3DTEXF_FORCE_DWORD = 0x7fffffff
} D3DTEXTUREFILTERTYPE;

Constants

D3DTEXF_NONE
Mipmapping disabled. The rasterizer should use the magnification filter instead.
D3DTEXF_POINT
Point filtering used as a texture magnification or minification filter. The texel with coordinates nearest to the desired pixel value is used. The texture filter to be used between mipmap levels is nearest-point mipmap filtering. The rasterizer uses the color from the texel of the nearest mipmap texture.
D3DTEXF_LINEAR
Bilinear interpolation filtering used as a texture magnification or minification filter. A weighted average of a 2x2 area of texels surrounding the desired pixel is used. The texture filter to use between mipmap levels is trilinear mipmap interpolation. The rasterizer linearly interpolates pixel color, using the texels of the two nearest mipmap textures.
D3DTEXF_ANISOTROPIC
Anisotropic texture filtering used as a texture magnification or minification filter. Compensates for distortion caused by the difference in angle between the texture polygon and the plane of the screen.
D3DTEXF_PYRAMIDALQUAD
A 4-sample tent filter used as a texture magnification or minification filter.
D3DTEXF_GAUSSIANQUAD
A 4-sample Gaussian filter used as a texture magnification or minification filter.
D3DTEXF_FORCE_DWORD
Forces this enumeration to compile to 32 bits in size. This value is not used.

Remarks

To check if a format supports texture filter types other than D3DTEXF_POINT (which is always supported), call IDirect3D9::CheckDeviceFormat with D3DUSAGE_QUERY_FILTER.
Set a texture stage's magnification filter by calling IDirect3DDevice9::SetSamplerState with the D3DSAMP_MAGFILTER value as the second parameter and one member of this enumeration as the third parameter.
Set a texture stage's minification filter by calling IDirect3DDevice9::SetSamplerState with the D3DSAMP_MINFILTER value as the second parameter and one member of this enumeration as the third parameter.
Set the texture filter to use between-mipmap levels by calling IDirect3DDevice9::SetSamplerState with the D3DSAMP_MIPFILTER value as the second parameter and one member of this enumeration as the third parameter.
Not all valid filtering modes for a device will apply to volume maps. In general, D3DTEXF_POINT and D3DTEXF_LINEAR magnification filters will be supported for volume maps. If D3DPTEXTURECAPS_MIPVOLUMEMAP is set, then the D3DTEXF_POINT mipmap filter and D3DTEXF_POINT and D3DTEXF_LINEAR minification filters will be supported for volume maps. The device may or may not support the D3DTEXF_LINEAR mipmap filter for volume maps. Devices that support anisotropic filtering for 2-D maps do not necessarily support anisotropic filtering for volume maps. However, applications that enable anisotropic filtering will receive the best available filtering (probably linear) if anisotropic filtering is not supported.

Enumerated Type Information

Header d3d9types.h
Minimum operating systems Windows 98